The injector plates in the Wittemann Pinpoint Carbonator are micro-porous and feature large contact surfaces on both sides of the unit. Beer passes across the plates as a thin liquid film, immediately receiving full CO2 saturation even at the lowest possible flow rate. The foam head remains stable over long time periods; when the head does recede, CO₂ saturation continues to hold at a high level.

The immediate saturation and improved bonding provided by pinpoint carbonation reduce foaming during the transfer of beer from Ruh to storage and greatly reduce the beer's air content.

Residual CO₂ is used for carbonation from Ruh stage to 2.75 volumes - or, depending on flow requirements, up to 3.0 volumes - in one pass-through.

Key Features

• Pinpoint" carbonation with micro-porous, stainless steel injector plates
• Liquid passes between two injector plates as a thin liquid layer which allows for immediate full CO₂ saturation
• Stainless steel construction with no hidden crevices, bends or orifices - "Sanitary" design
• In-line installation - vertical or horizontal
• In-line solution cleaning
• Lowest product pressure drop (less than 0.5psi)
• Manual or fully-automatic operation is available
• Stainless steel support stand available
• Comes with flanged ends as standard or optional tri-clamp connections (tri-clamp connections standard on 1" units)